Shop Ladder Kits - Made in Canada

We were asked by a client to make steel handrails for their Muskoka ladder. We had never made these before, so we worked with a welder and created custom steel hand rails, powder coated, that extend 2’ above the ladder.

Since then we had a client request we “bend” the part that extends above the ladder to make it easier to grab when you get onto and off of the ladder.

The handrails are now made in two pieces, the top piece with the bend and the bottom piece that is an extension down the ladder. Each piece is about 44”, perfect for mailing.

This item includes the full handrail which consists of two pieces total length = 88”

Price includes one pair.

Proudly made in Canada

We were asked by a client to make steel handrails for their Muskoka ladder. We had never made these before, so we worked with a welder and created custom steel hand rails, powder coated, that extend 2’ above the ladder.

Since then we had a client request we “bend” the part that extends above the ladder to make it easier to grab when you get onto and off of the ladder.

The handrails are now made in two pieces, the top piece with the bend and the bottom piece that is an extension down the ladder. Each piece is about 44”, perfect for mailing.

This item includes two of the top piece only.

Proudly made in Canada

Quiet Glide hardware kits include 7 step support rods, for a 7 step ladder. If you are ordering an 8 or 9 step ladder you will require either 1 or 2 additional step support rods. The support rods come with the 4 screws required for the additional ladder step(s).

The step support rods are available in some of the different colours. Please note that the manufacturer includes black step support rods in the oil rubbed bronze hardware kits. Step support rods are not available in oil rubbed bronze.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

Meadow Lane sliding hook hardware kits include 7 step support rods, for a 7 step ladder. If you are ordering an 8 or 9 step ladder you will require either 1 or 2 additional step support rods. The support rods come with the 4 screws required for the additional ladder step(s).

The step support rods are available in some of the different colours. Please note that the manufacturer includes black step support rods in the oil rubbed bronze sliding hook hardware kits. Step support rods are not available in oil rubbed bronze.

What is Meadow Lane?

Meadow Lane is budget-friendly sliding ladder hardware designed by Putnam Rolling Ladder for home and business interiors.

Meadow Lane rails require an end cap at each end to prevent your ladder from coming off the rail accidentally.

The end caps are available in different colours.

What is Meadow Lane?

Meadow Lane is budget-friendly sliding ladder hardware designed by Putnam Rolling Ladder for home and business interiors.

When you join Meadow Lane rails together you require a splice kit.

The splices are available in different colours.

What is Meadow Lane?

Meadow Lane is budget-friendly sliding ladder hardware designed by Putnam Rolling Ladder for home and business interiors.

When you choose Meadow Lane hardware for your ladder you will brackets to attach your rail to your cabinets. Brackets should be no more than 24 3/4" apart

The brackets are available in different colours.

What is Meadow Lane?

Meadow Lane is budget-friendly sliding ladder hardware designed by Putnam Rolling Ladder for home and business interiors.

When you choose Meadow Lane hardware for your ladder you will need a rail to attach your ladder to.

The ladder rails are manufactured to a high specification and made from hollow aluminum and have been rigorously tested so you can feel safe and secure when climbing your ladder.

The rails are supplied in 4’ lengths, which can be joined together using a splice kit (not included, but available to purchase separately) for longer rails or cut down to the perfect size on-site.

You will need to purchase brackets and end caps as well.

Notes:

- Brackets, splice kit and end caps are not included.  You need to add these to your order.

- Brackets should be no more than 24 3/4" apart.

- Most of the hardware colours are powder coated, during the process they are held up using hooks. These hooks cause marking in the paint at regular intervals on the back of the rails. Once the rail is fitted these manufacturing marks will be completely out of sight.

What is Meadow Lane?

Meadow Lane is budget-friendly sliding ladder hardware designed by Putnam Rolling Ladder for home and business interiors.

This splice kit is required to join two Quiet Glide rail pieces. This kit works with all rail colours.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

Quiet glide rails require an end cap at each end to prevent your ladder from coming off the rail accidentally.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

When you select Quiet Glide single roller (sliding hook) hardware for your rolling ladder you will need horizontal or vertical brackets for the rail. These are the vertical brackets.

Notes:

- Brackets should be no more than 32" apart.

- You will need to purchase end caps as well.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

When you select Quiet Glide single roller (sliding hook) hardware for your rolling ladder you will need horizontal or vertical brackets for the rail. These are the horizontal brackets.

Notes:

- Brackets should be no more than 32" apart.

- You will need to purchase end caps as well.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

Classic rollers, or double rollers are fully secured to the rail, moves like a dream, then holds perfectly still when in use thanks to automatic braking wheels. With Quiet Glide's unique sliding system, easily store your ladder fully upright, then pull out when in use. Perfect for libraries and any area with a single rail, where you need to keep the ladder attached to the wall.

Includes:, Double Rollers, Sunburst Brake Wheels, x7-16" step HW kits

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

Sliding hooks allow your ladder to be easily lifted off of one rail and placed on another. Move your ladder along the rail, then it holds still when in use thanks to the friction between the rubber lined hooks on the rail. An economically, efficient system that uses non braking wheels. With Meadow Lanes unique sliding system, easily store your ladder fully upright, then pull out when in use. Perfect for any room including: kitchens, libraries, pantries, walk in closets and wine cellars. This kit includes 8’ of rail with hardware!

Includes:, Sliding Hooks, Standard Wheels, x7-16" step HW kits, 2×4’ Rail, 4 x Brackets, 1 x Spice and 1 x End Caps

Single rollers, or rolling hooks, allow your ladder to be easily lifted off of one rail and placed on another. Your ladder will move like a dream, then holds perfectly still when in use thanks to automatic braking wheels. With Quiet Glide's unique sliding system, easily store your ladder fully upright, then pull out when in use. Perfect for kitchens, libraries, pantries, walk in closets and wine cellars.

Includes:, Single Rollers, Sunburst Brake Wheels, x7-16" step HW kits

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

Whether you choose rolling hook or double roller hardware for your Quiet Glide rolling ladder you will need rails to attach your ladder to.

The ladder rails are manufactured to a high specification and made from solid aluminum and have been rigorously tested so you can feel safe and secure when climbing your ladder.

The rails are supplied in 4’ and 6’ lengths, which can be joined together using a splice kit for longer rails or cut down to the perfect size on-site.

You will need to purchase brackets and end caps as well.

Notes:

- Brackets and end caps are not included.  You need to add these to your order.

- Brackets should be no more than 32" apart.

- Most of the hardware colours are powder coated, during the process they are held up using hooks. These hooks cause marking in the paint at regular intervals on the back of the rails. Once the rail is fitted these manufacturing marks will be completely out of sight.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

When you select Quiet Glide double roller (classic roller) hardware for your rolling ladder you will need horizontal or vertical brackets for the rail. These are the horizontal brackets.

Notes:

- Brackets should be no more than 32" apart.

- You will need to purchase end caps as well.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

White oak 9’ 6” ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 114" long with a maximum rail height 108"

• 16” wide

• 8 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

White oak 8’ 5” ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 101" long with a maximum rail height 96"

• 16” wide

• 7 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

Walnut 10’ ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 120" long with a maximum rail height 114"

• 16” wide

• 9 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

Walnut 9’ ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 114" long with a maximum rail height 108"

• 16” wide

• 8 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

Walnut 8’ 5” ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 101" long with a maximum rail height 96"

• 16” wide

• 7 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

When you select Quiet Glide double roller (classic roller) hardware for your rolling ladder you will need horizontal or vertical brackets for the rail. These are the vertical brackets.

Notes:

- Brackets should be no more than 32" apart.

- You will need to purchase end caps as well.

What is Quiet Glide?

This patented technology manufactured by Custom Service Hardware based in Wisconsin USA makes the hardware run smoothly and quietly.  It has been tested through 100,000 cycle checks to ensure the technology can withstand a lifetime of use.   The 100,000 cycle test, tests not only the rollers but also the bearings, powder coatings, rails and brackets, which mean it tests EVERYTHING!

Maple 10’ ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 120" long with a maximum rail height 114"

• 16” wide

• 9 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

Maple 9’ 6” ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 114" long with a maximum rail height 108"

• 16” wide

• 8 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

Maple 8’ 5” ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 101" long with a maximum rail height 96"

• 16” wide

• 7 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.

White oak 10’ ladder kit is made in Canada, using lumber milled locally and includes:

• 2 side rails 120" long with a maximum rail height 114"

• 16” wide

• 9 steps

• 1 top rung

NOTE: This kit includes wood pieces only. Hardware is available, but not included. Please let us know the details of your project and we will help you select the correct hardware.